285805 Heavy Duty Water Inlet Valve with Mounting Bracket

The water inlet valve on your washing machine is used to fill the tub with cold, warm, or hot water for the wash and rinse cycles. This part could have either a blue or green-colored valve body. There are two ports for water to enter and this valve is compatible with a half-inch ID hose. It has two 3/4-11×1/2 NHT hose threads. You may have a faulty valve if your washer is leaking, has no hot or cold water, will not stop filling with water, will not fill with water, fills and drains at the same time, or is noisy. To confirm that the valve is faulty, unplug the washer when the symptom occurs. If the washer continues to fill, then the inlet valve is defective. This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley. This part works with the following products: Washer, Washer Dryer Combo. This part fixes the following symptoms: Will not stop filling with water. No hot or cold water. Will not fill with water. Leaking. Noisy. Fills and drains at the same time. Part Number 285805 (AP3094541) replaces 285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389, 3360391, 3360392, 3429537, 358992, 370067, 388328, 3952163, 3952164, 3955673, 8228, 868761, AH334646, EA334646, PS334646, W10110517.

Product Features

• Heavy Duty with Warranty
• 285805 works with the following brands: Whirlpool, Maytag, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, also works with the following products: Washer, Washer Dryer Combo.
• Original Manufacturer Parts
• 285805 (AP3094541) replaces 285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389….