Broan 639 Wall Cap for 3-1/4″ x 10″ Duct for Range Hoods and Bath Ventilation Fans
Maximize the air and sound performance of your Broan ventilation fan or range hood using one of our wide variety of ducting accessories.
Product Features
Overall sizing is 12-3/4″ wide x 5-5/8″ high. Duct fitting protrudes 4-7/8″ from back of cap to allow proper fit to the ductwork (NOT for use with dryer venting)
Equipped with a spring-loaded backdraft damper and bird screen to keep nests and small animals on the outside
Wall cap is made of 24 gauge CRCQ steel construction with a black electrically-bonded epoxy finish for durability and long life
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…
Hauslane | Chef Series 30″ WM-590 | Black Stainless Steel Fingerprint and Smudge Resistant | 3 Speed Wall – Mount Kitchen Fan | 860 CFM, Easy Clean Baffle Filters, LED | Duct or Ductless Options
Incredibly rude and unhelpful customer service, even when range was still under warranty. ...
Single Wall Oven, GASLAND Chef GS606MB 24″ Built-in Natural Gas Oven, 6 Cooking Functions Convection Gas Wall Oven with Rotisserie, Mechanical Knobs Control, 120V Electric Ignition, Black Glass Finish
GASLAND Chef 24″ 2.3Cu.f Multi-functional Built-in Tempered Glass Electric Single Wall Oven, 24-Inch 240V 3200W 11 Cooking Function Electric Oven with Digital Touch Control and 3-Layer Glass Window
Broan Model BPS1FA30 Range Hood Filter – 11-3/4″ X 14-1/4″ X 3/8″ Grease Filter BPS1FA30, 99010299 Replacement for NuTone Allure 30″ WS1 QS2 and Broan QS1 30″ (Made in USA) (2-Pack)
Loading...
This worked well to vent a new over the range microwave to the outside. The horizontal dimension of the duct on this is actually about 10.25 inches so that when it mates with a standard 3×10 duct from the inside there is a gap which I caulked with high temp silicone to prevent air leakage. However, the extra .25 inch makes it easier to place the cap duct over the interior duct. One of the “big box” stores had a similar heavy duty cap which had a longer duct which might work better for…