Continental Fan Lint Trap
May be installed between the dryer and the booster fan to help reduce lint build-up in duct and maintenance to the fan. Improves drying capacity. 26 gauge corrosion resistant, satin coat steel can be painted to match decor. Mounts flush to drywall surface. Ceiling or wall mount option. 9/16″ mounting flange. One piece door with integral screen. Galvanized mesh filter. Sturdy slide mechanism is simple to use. This optional lint trap can be used with Dryer Booster Kits.
Product Features
- 20 Ga. corrosion-resistant, satin coat steel
- 0.75″ mounting flange
- One piece door with integral screen. Door is painted white with 3″ veiwing port.
- Galvanized mesh filter
- Sturdy slide mechanism
Loading...
Works well, but not as advertised. I’d have given it a five star review had it actually had the spring type cover as advertised. Turns out that the lint screen came attached to the cover and was held in place by friction fit which probably holds it together better than the spring. I added a dense foam gasket to the sides (see picture) to help seal the cover better. It works very well, eliminating most of the lint from downstream of the trap. Trap needs to be cleaned of lint after each and every dryer load just like the one in…
Every house should have one! Your lint trap that comes with your clothes dryer does not catch “all” the lint.I installed this additional lint trap right above the dryer at chest level. Cut out sheetrock, cut dryer vent to size, placed lint trap in and secured with duct tape (real duct tape…. Shinny type tape) don’t use what we call duct tape. Just pull out lint door and clean after each load.Amazing how much lint standard dryer vent misses and how much this one collects. Also installed dryer…