The Frigidaire IM115 Next Generation Ice-Maker Kit is designed for Frigidaire top-freezer refrigerator models built in 2003 to present with the condenser coil on the back of the refrigerator. This kit allows you to add ice-making capabilities to all freezers that accept an icemaker. It will also fit selected side-by-side refrigerators that do not have a water dispenser in the freezer door.
Product Features
Make cubes of ice directly from your freezer
Use with Frigidaire models that were built in 2003 to present
Fits top mount refrigerators and side-by-side refrigerators without freezer-door water dispenser
Compatible with 14.5 through 18.6/20.8 cu. ft. refrigerators
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…
BOSSIN Beverage Refrigerator and Cooler, 120 Can Capacity with Smoky Gray Glass Door for Soda Beer or Wine,Compressor Touch Panel Digital Temperature Display for Home, stainless steel(4.5 cu.ft)
Mini Fridge with Cooler and Warmer, 15 Liter/18 Cans AC/DC Portable Compact Fridge, Thermoelectric & Super Quiet Mini Refrigerator for Car and Home, Offices, Dorms
TACKLIFE Compact Refrigerator Super Quiet, Mini Fridge with Freezer 50L, 1.6 Cu.Ft(Holds 40 cans), Single Reversible Door, Small Cooler Perfect for Soda Beer or Drink, MPBFR161
Zephyr Presrv Dual Zone Wine & Beverage Cooler with Glass French Door. 24 Inch 5.18 cu. ft. Refrigerator for Under Counter, Wine Fridge, Beer Fridge, Compact Bar Fridge, Full Size Beverage Center
Antarctic Star Compact Mini Refrigerator Separate Freezer, Small Fridge Double 2-Door Adjustable Removable Retro Stainless Steel Shelves Garage Camper Basement/Dorm/Office 3.2 cu ft.Red
Loading...
Works with Sears/Kenmoor After some research it appeared this unit works with the Sear 253 model series. All the refrigerator connectors, plugs, and throughholes and screw holes are as described and fit exactly this ice maker. The instructions were reasonably detailed and accurate and it took about 1 hour to install. It comes with all the parts needed to mount to the refrigerator but does not come with the kit to connect to the cold water tap. There is a small bracket with a slotted hole to adjust the level of the…
Easy install, need to buy kit to attach to water supply I’m thrilled I finally bought this ice maker and can’t believe it took me a decade to do so. Installation was easy. Hardest part was deciphering exactly where the leveling screw went. I finally decided, correctly, that I needed to use the self threading machine screw to screw it into one of the holes in the bottom of the ice maker. It wasn’t hard but I wanted to make sure I didn’t put it in the wrong spot and wind up damaging the ice maker.I didn’t realize that I would need to…
It works … but not well or consistently. Install was easy enough – maybe 30 minutes – but it’s not working as well as it should. Plenty of water pressure (95psi) and solid copper 1/4 inch line to the valve. Valve and line to ice maker flushed prior to install as well. After 4 days of trouble shooting have zeroed in on a very picky water vale. Does not cycle consistently. Resistance on valve tests within range (270 ohms) but everything leads me back to a bad valve. It happens and it’s impossible to tell sometimes without replacing it…