GE GFC325V .33 Horsepower Continuous Feed Disposal Food Waste Disposer with Power Cord attached
GE continuous feed food waste disposer has a high RPM and high torque, to grind food finer and faster. Which is really a big deal. Since select GE Disposal disposers can reach speeds of over 3500 RPM, while many brands can’t reach over 2000 RPM, the Disposall disposers are less likely to jam. And, stainless-steel dual-swivel grinder blades means they’re less likely to corrode, even after years of use. The Disposall offers a faster and finer grind right from the beginning. Now you can be free from the anti-jam key and able to power through food the first time, so you don’t waste time. Installation made E-Z. E-Z Mount System makes installation a breeze for anyone. We have fewer parts and steps than most of our competitors’ installation systems. The five-step installation starts by attaching a sink flange assembly. Then, the disposer snaps onto the sink flange under your sink, allowing water and waste to safely travel down the pipes. And, the Disposall easily attaches to your existing plumbing and wiring. After a quick installation, you can trust that your Disposall was made with stainless steel and corrosion-resistant materials for maximum lifespan and durability. Drain boost technology helps keep your drain free and clear of food waste to ensure your water runs smoothly in the right direction. The Disposall has an angled fin which pumps water and ground food through pipes with higher speed and pressure to keep drains purged and help reduce clogs. All our models operate quietly and some even offer sound reduction technology. The sound reduction package includes a fully insulated sound shell, so our disposers can handle your toughest challenges while minimizing noise. Did you know that Americans throw away nearly 25 percent of all food prepared? And decomposing waste in landfills is one of the largest producers of methane gas, which is the main contributor of global warming? It’s true. 
Large-capacity continuous-feed food-waste disposal with 1/3-horsepower motor.
view larger
1/3-Horsepower Continuous-Feed Food-Waste Disposal
Helps Take Care of the Dirty Work
Send food waste down the drain once and for all with this large-capacity GFC325V garbage disposal by GE. The disposal’s powerful grinding action reduces food waste to small particles, making the unit safe for any properly sized septic system.
Even more, the food-waste disposal features an advanced insulation package that helps ensure super-quiet operation, making it possible to maintain the cheerful, festive mood of a successful dinner party even during cleanup. Hardworking, quiet, and easy to install–the GE disposal makes a useful addition to any busy kitchen.
Convenient Design
Thoughtfully constructed, the food-waste disposal system also provides a two-level precutter, an on/off wall-switch with a sink stopper, a manual-reset overload protector, and a splashguard, as well as stainless-steel, jam-resistant, dual swivel impellers. Other highlights include cold-rolled carbon-steel armature shaft material, a stainless-steel sink flange, and a galvanized-steel turntable.
Easy-to-Use Continuous Feed
To operate, simply remove the sink stopper, turn on a medium flow of cold water, flip the switch to ON, and scrape in the food waste. The continuous-feed disposal takes care of the rest. Before turning the disposal off, let the water and the disposal run for about 25 seconds after the shredding and grinding stops to ensure all waste is thoroughly flushed through the trap and drain.
The disposal measures 5.19 inches deep by 5.5 inches wide by 12.69 inches high, and detailed installation instructions come included.
GFC325V At a Glance: 1/3-horsepower motor Large-capacity continuous-feed disposer Over 2500 RPM grinding action* Stainless-steel jam-resistant, dual-swivel impellers EZ mount installation Line cord power connection Standard sound-insulation package Cold-rolled carbon-steel armature shaft material Splashguard Wall-switch with sink stopper Manual reset overload protector Dishwasher drain connector Stainless-steel sink flange Galvanized-steel turntable 2-level precutter
* Based on RPM testing of cleared GE and competitive models
Product Features
- 1/3 horsepower permanent magnet motor, with over 2500 RPM grinding action (based on RPM testing of cleared GE and competitive models)
- EZ Mount installation with removable splash guard and stopper included
- Large capacity with galvanized steel turntable
- DrainBoost technology
- Stainless steel, dual-swivel, anti-jam grinding blades
Loading...
Same as Whirlaway 191. I used it to replace GFC310. This was the replacement for a GE 325F that lasted a lucky 13 years.. I love these disposals, and will be a loyal customer as long as they are made to be so simple. It took only 2 screwdrivers to remove the old unit and install the new. One flathead to remove the flange to the drain and one large phillips to be used only as leverage for removing and installing the main connector.ring. To the people that claim these “shake loose and fall out” check your process and look at youtube…
This product is identical to Whirlaway 191 (same product sold under different labels). The GE GFC325V comes with an attached power cord; the Whirlaway unit came with an unattached power cord (you have to wire it to the unit).I bought this unit to replace an old GE GFC310 which is no longer made. GFC325V is not identical to GFC310 in terms of dimensions. GFC310 used the 3-bolt mount, but GFC325V has the EZ mount, so GFC325V is shorter than GFC310 by about an inch. In my case the vertical…