Fit on my old Insinkerator! This review is for the InSinkErator FDT-OO Flexible Discharge Tube.The item fit my 17 year old Insinkerator perfectly. The only negative comment I have is that there are no instructions with the kit showing how to assemble it properly.(As an aside I ended up replacing the Inksinerator with a 2015 model, so I am not certain that the order in which I assembled the pieces would have held up long term – but the point is that the pieces did fit as advertised)…
Installation instructions FWD from manufacturer, helpful FYI The thing came with no instructions. The Insinkerator site helped with this advice:”If you are using the FDT-00, here is what you need to do to connect the flexible tube to the disposer. Force Two Bolt Flange over the raised lip on the Flexible Discharge tube. Stretch the Rubber Gasket over the raised lip of Flexible Discharge Tube with flat side of Rubber Gasket facing out. Make sure that the raised lip sits inside the groove on the inside of the Rubber Gasket. Secure the Flexible…
Ultra Durable Dishwasher Prong Rack Caps 15 mm Long Replacement part by Blue Stars – Flexible Vinyl, Flexible Round End Caps Shelf Organizer Tip Caps Wire Thread Protector Cover – PACK OF 200
Kitchen Silicone Stove Counter Gap Cover – Flexible Easy Clean Heat Resistant Wide & Long Gap Cap Fillers, Seals Spills Between Appliances, Furniture, Stovetop, Oven, Washer & Dryer, Set of 2 (White)
Everflow 25612K 12 Feet Washing Machine Hot/Cold Hose Durable Rubber Kit, EPDM Rubber Tube & Cover, F3/4 In. X F3/4 In. Supply Line Stamped Brass Hose End, UPC Approved, Made in USA (1 Red + 1 Blue)
Loading...
Fit on my old Insinkerator! This review is for the InSinkErator FDT-OO Flexible Discharge Tube.The item fit my 17 year old Insinkerator perfectly. The only negative comment I have is that there are no instructions with the kit showing how to assemble it properly.(As an aside I ended up replacing the Inksinerator with a 2015 model, so I am not certain that the order in which I assembled the pieces would have held up long term – but the point is that the pieces did fit as advertised)…
Installation instructions FWD from manufacturer, helpful FYI The thing came with no instructions. The Insinkerator site helped with this advice:”If you are using the FDT-00, here is what you need to do to connect the flexible tube to the disposer. Force Two Bolt Flange over the raised lip on the Flexible Discharge tube. Stretch the Rubber Gasket over the raised lip of Flexible Discharge Tube with flat side of Rubber Gasket facing out. Make sure that the raised lip sits inside the groove on the inside of the Rubber Gasket. Secure the Flexible…