Do you want to a Replacement Garbage Disposal Splash Guard Sink Baffle Disposal?
This product can help you to slove it.
Before replacement, please remove the old one from the garbage disposal.
However, be sure to carefully measure your old splash guard and compare it to this one’s size.
The splash guard was a very slightly tighter but had no problem fitting.
As a mater of fact the tighter fit improved the splash guard as it was not sliding out all of the time.
The rubber is much more flexible and are easy to work with, which help water and food residue slide through easier.
It prevents splash-back, muffles disposal noise, and prevents silverware from falling into the disposal.
It can also be removed easily for cleaning or future replacement.
If you worry about the fins that make up the splash guard greatly hinder water passthrough that you can trimmed every other fin about 1/4-1/2 inch in as to not greatly hinder the splash guard feature and still allow easy water passthrough.

Installation steps:
1. If desired, carefully trim the “teeth” off of the original black-rubber gasket, but leave the ring portion of the gasket in place.
2. Orient the new Splash Guard as a shallow cup and gently press it down into the throat of the disposal until it engages the flange.

Specification:
Material: Rubber
Color: Black
Package includes:
3 x Disposal splash guard

Please note:
These are compatible spare parts, the brand names of sinks and disposal have been mentioned above for reference purposes only.

Product Features

• Garbage disposal splash guards are made of high quality rubber material, can stopped the evil attack of garbage coming back up from the disposal and hitting you in the face
• Replacement garbage disposal parts outer size: 3-1/8 inch in diameter, 0.5 inch in height (8 x 1.3 cm), inner size: 2-3/5 inch in diameter (6.6 cm), high walled sides to better grip the walls of the disposal and ensure a tight fit
• This black garbage disposal rubber splash guard has good compatible, which can work well with all standard sinks and disposal. Compatible with Insinkerator, Waste King, Whirlaway, Sinkmaster, Kohler
• The splash guard was a very slightly tighter but had no problem fitting. As a mater of fact the tighter fit improved the splash guard as it was not sliding out all of the time. The rubber seems to be softer which help water and food residue slide through easier
• In contrast the plastic versions are too stiff and sharp for the fingers. The rubber is much more flexible and easy to work with. Just what you needed to keep splashing down and keep stuff from jumping up out of the grinder during use