Nutri Ninja Blender Replacement Parts,Ninja blender Extractor Blade Assembly with 7 Fins on Bottom For Auto iQ 900w 1000w Blender
Please make sure your existing blade has 7 Fins before purchase
Our 900w 1000w Replacement Bottom Blade only fit Model BL2012, BL2013, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012, (Only
fit for 18oz, 24oz, 32oz not fit for 16oz).
NOT FIT these model number blenders: BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830.
Pay attention to before use :
◆Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
◆Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
◆Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
◆Place the replacement blade onto the cup and screw it tightly until you have a good seal
◆Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Product Features
- Ninja blender replacement parts, make your Juicer reuse again and perfect for all your blending and mixing needs.
- 7 Fins Bottom Blade Assembly 4″ outside diameter with stainless steel blade, brings qualified anti-corrosion performance
- Ninja blender accessories apply to: Model BL2012, BL2013, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012, (Only fit for 18oz, 24oz, 32oz not fit for 16oz).
- PLEASE NOTE: These cups NOT FIT these model number blenders: BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830.
- The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade