Basic as it was built – IT WORKS VERY WELL First off I have to laugh at all the negative comments…Obviously these people have little to no comprehension of how things are supposed to “help” correct your current issues NOT necessarily “solve” them right out of the box.Here are the YES things you should expect:1) Yes you will need to do a little measuring and adjusting to find the correct spread of the periscope and alignment. IN FACT YOU MAY NEED TO DO IT MULTIPLE TIMES before you find the right fit…
A good solution that takes some prep time to make work. Buy foil tape. I bought a replacement dryer and the vent did not line up with the existing exhaust. It was over by about 3 and 3/4 inches and up by about 1 and 1/2 inches. A vent hose would have put the dryer out about a foot, and the foil type of flexible hose kinked up and would have been a serious fire hazard. This was just what I needed. Because it is adjustable, it is not ready to go right out of the package. You do have to carefully measure, test, remeasure and test before you can seal up the edges with…
Air Conditioner Portable Exhaust Hose – 5 Inch Diameter – 59 Inch Long – Universal Flexible Counter Clockwise Room Airconditioner AC Vent Replacement Tube – Window Kit Extension Accessories Parts
Dryer Vent Cleaner Kit 20 FT, iTrunk Dryer Vent Duct Cleaning Kit with Flexible Strong Rods Lint Cleaner Synthetic Cleaning Brush Head for Dryer Vent, Up To 20 Feet, Use with or without Power Drill
285785 Washer Clutch Kit Replacement by DR Quality Parts -Works with Whirlpool & Kenmore – Instruction Included – Replaces 285331, 3351342, 3946794, 3951311, AP3094537
kenmore elite dishwasher top rack parts W/ 0.9 Inch Diameter W10350376 W10195840 W10195839 (6pcs) for Kitchenaid Whirlpool Kenmore Dishwasher Top Rack Parts for PS10064063 AP5956100 WPW10195839
Loading...
Basic as it was built – IT WORKS VERY WELL First off I have to laugh at all the negative comments…Obviously these people have little to no comprehension of how things are supposed to “help” correct your current issues NOT necessarily “solve” them right out of the box.Here are the YES things you should expect:1) Yes you will need to do a little measuring and adjusting to find the correct spread of the periscope and alignment. IN FACT YOU MAY NEED TO DO IT MULTIPLE TIMES before you find the right fit…
A good solution that takes some prep time to make work. Buy foil tape. I bought a replacement dryer and the vent did not line up with the existing exhaust. It was over by about 3 and 3/4 inches and up by about 1 and 1/2 inches. A vent hose would have put the dryer out about a foot, and the foil type of flexible hose kinked up and would have been a serious fire hazard. This was just what I needed. Because it is adjustable, it is not ready to go right out of the package. You do have to carefully measure, test, remeasure and test before you can seal up the edges with…