INSTALLATION INSTRUCTIONS: 1) Level the WASHER by rotating front feet with an adjustable wrench to raise/lower. Use a level on top of WASHER until it is completely level, both front-to-back and side-to-side. 2) Clean the top of the WASHER with an all-purpose cleaner, then ensure it is completely dry. 3) Remove the leveling feet from the bottom of the DRYER with an adjustable wrench. 4) Clean the bottom of the DRYER with an all-purpose cleaner, then ensure it is completely dry. 5) Peel protective paper from the adhesive side of one of the foam strips provided. Stick the foam strip along the bottom edge of the DRYER covering small ribs along the bottom edge of the cabinet. Repeat on each edge of the bottom of the DRYER (all four bottom directions). NOTE: Foam strips should not stick out past the edge of DRYER cabinet. 6) With an assistant, lift DRYER on top of WASHER. Line up back of DRYER with back of WASHER. 7) Locate the two horizontal slots in back of DRYER cabinet (directly above stacking bracket screw holes in back of WASHER cabinet). Insert curved end of the metal stacking bracket into horizontal slots on back of DRYER. Attach brackets to the back of the WASHER with provided screws This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) OEM product and Impresa Products has no affiliation with or endorsement from these manufacturers. Our product is not covered under any Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) manufacturer’s warranty. The afforementioned brand names and logos are the registered trademarks of their owners. Any use of the afforementioned brand name, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Product Features

• IDEAL FIT FOR MANY MODELS: Our bracket kit is a perfect fit for an array of Whirlpool (R) Duet and Epic front loading washers and dryers. Our bracket kit helps you save space by stacking your dryer on top of your washer. Fits a variety of models from Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) and KitchenAid (R)
• COMPARABLE TO OEM PARTS AT A GREAT VALUE: Our front load washer / dryer laundry stacking kit is made to high quality standards and is durable, robust, and made to last. Don’t waste money on overpriced OEM kits – our kit will do the job!
• INSTRUCTIONS INCLUDED FOR A CONFIDENT INSTALLATION: Instructions for installation below. Standard tools and an assistant required. Comparable to OEM part # 8541503, as well as 8212640, AH888067, 8212640, AH888067, 8519492, 8529965, EA888067, 8529966, 8535926, PS888067, 962139, AP3180011, and 38005
• IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR EQUIPMENT, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Fits many front load models, but does not fit all models. DOES NOT FIT TOP LOAD MODELS. Ideal for closet or alcove installation
• Please note: This is an aftermarket product (produced by Impresa Products). We have no affiliation with or endorsement from any of the manufacturers mentioned