Not selling what is in photo Replaced the OEM drain pump in Kenmore HE3T/110.42934200 – perfect fit/OEM Askoll 75W pump. If your drain pump is failing (“02/SUD” codes or loudish grinding noises from pump area) your choices are 1) Replace the entire assembly with new OEM (Askoll) pump or 2) replace the pump only with a cheap Chinese knockoff and hope for the best. While significantly more expensive – I have not had good luck with Chinese knockoff electronic rubbish in the past – and since the original Askoll pump…
Be aware the pump you will receive is not what is in photo. The angle of the output tube is rotated about 75 degrees from what is in our 8 year old Whirlpool Duet. Yes it works but a little harder to install hose.My major grip is I ordered from these folks to get this version. Amazon has pictured the same one as I received and I would have ordered it instead which since I am a Prime member I would have saved $13 on purchase and had guaranteed 2 day delivery. Fixthe Photo…
Washer drain pump must have been malfunctioning for a long time but not appreciated as it still drained, but slowly. The pump vane apparently gets loose on the shaft, so it seems to pump, but is not able to lift the water all the way to the drain pipe. The washer was giving a drain error, so It left me puzzled for a while until I decided to just believe the machine, ordered and put the new one in; then the difference was obvious. Plus it was a lot quieter.The whirlpool/Sears HE3t is a…
Washing Machine Hoses Stainless Steel – Braided Washer hose 6 ft Burst Proof (2 pack) – Hot and Cold Color Coded Third Layer – Lead free Water Supply Line
BulletProof. I had 20 year old rubber hoses ... I know a guy who just incurred 50,000 in wat...
Ironing Blanket Ironing Mat Upgraded Thick Iron Mat Heat Resistant Blanket Ironing Pad Double-Side Using Ironing Cloth Mesh for Washer Dryer Table Top Ironing Board Portable Travel Ironing Pad for Bus
VEVOR 110V Commercial Ice Makers 90-100LBS/24H with Water Drain Pump 33LBS Storage Free-Standing 4×9 Cubes LCD Display Auto Clean for Restaurant Bar, 90-100LBS, Includes Scoop and Connection Hose
Washing Machine Rubber Feet Pads | Anti Vibration & Anti Walk Rubber Dampers | Textured Grip Prevents Walking & Skidding | Best For Laundry Washer & Dryer Noise Reduction | Set of 4 by BlackPad
Not selling what is in photo Replaced the OEM drain pump in Kenmore HE3T/110.42934200 – perfect fit/OEM Askoll 75W pump. If your drain pump is failing (“02/SUD” codes or loudish grinding noises from pump area) your choices are 1) Replace the entire assembly with new OEM (Askoll) pump or 2) replace the pump only with a cheap Chinese knockoff and hope for the best. While significantly more expensive – I have not had good luck with Chinese knockoff electronic rubbish in the past – and since the original Askoll pump…
Be aware the pump you will receive is not what is in photo. The angle of the output tube is rotated about 75 degrees from what is in our 8 year old Whirlpool Duet. Yes it works but a little harder to install hose.My major grip is I ordered from these folks to get this version. Amazon has pictured the same one as I received and I would have ordered it instead which since I am a Prime member I would have saved $13 on purchase and had guaranteed 2 day delivery. Fixthe Photo…
Washer drain pump must have been malfunctioning for a long time but not appreciated as it still drained, but slowly. The pump vane apparently gets loose on the shaft, so it seems to pump, but is not able to lift the water all the way to the drain pipe. The washer was giving a drain error, so It left me puzzled for a while until I decided to just believe the machine, ordered and put the new one in; then the difference was obvious. Plus it was a lot quieter.The whirlpool/Sears HE3t is a…